Description

As efficiency gains are made in building lighting and HVAC systems, plug loads become a greater percentage of building energy use and must be addressed to meet energy goals. HVAC and lighting systems are targeted because they are typically the highest energy end uses, but plug load reduction and control should be considered as part of a comprehensive approach to energy reduction. In a minimally code compliant office building, plug loads typically account for 25% of the total electrical load. In an ultra-efficient office building, plug loads are typically one of the last end uses to be considered for energy conservation and, as a result, can account for more than 50% of the total electrical load (Lobato et. al, 2011). Plug load efficiency strategies are different than other building efficiency strategies because they involve relatively small loads distributed throughout a building. These loads typically move around in the building when office configuration changes are made, so these loads may shift between circuits over time. Commercially available advanced power strips (APS) can be used to mitigate wasted energy from most plug loads and, in many cases, can have a return-on-investment of approximately two years or less. In recent technology demonstrations, data from occupancy sensors tracking plug load reductions with occupancy have shown energy-saving potential for both business and nonbusiness hours. Also, dense panel-level sub-metering has been used to quantify whole-building receptacle circuit energy consumption, energy savings, and return-on-investment for the whole building. Receptacle-level metering has been used to show the plug load energy consumption of individual devices and workstations. This paper documents the process (and results) of applying advanced power strips with various control approaches.

Citation: ASHRAE Papers CD: 2014 ASHRAE Winter Conference, New York, NY

Product Details

Published:

2014

Number of Pages:

8

File Size:

1 file , 1.5 MB

Product Code(s):

D-NY-14-C039