Description

The well-stirred assumption with surface-averaged convection coefficients is commonly employed by building thermal simulation programs to model heat transfer from the room air to internal surfaces (such as walls and windows). This approach assumes the room air to be at a uniform temperature (the influence of temperature stratification is ignored) and characterizes the heat transfer with surfaceaveraged convection coefficients. A model of the IEA Annex 21/Task 12 double-glazed test room was created and simulations were performed using the well-stirred modeling approach. Predictions of the room’s heating energy consumption were found to be highly sensitive to both convection coefficients and to the temperature assumed for the room air. The sensitivity was so great that it is concluded that an accurate characterization of the convective regime is critical in order to accurately simulate configurations like the IEA test room. The simulation results were found to be far more sensitive to internal convection modeling than to other factors, such as the modeling of fabric thermal properties and air infiltration. In response to the demonstrated need for more accurate internal surface convection algorithms, recommendations are provided on an approach that will allow calculations to be responsive to local flow conditions.

Units: SI

Citation: Symposium, ASHRAE Transactions, vol. 105, pt. 2, Seattle 1999

Product Details

Published:

1999

Number of Pages:

12

File Size:

1 file , 390 KB

Product Code(s):

D-7454