Description

In a joint research project involving ASHRAE and the National Research Council Canada (RP-1108), the effect of fires involving communication cable installed in air-handling plenums was investigated. The project included surveys in North American office buildings to determine the type and quantities of cable in return air plenums and fire scenarios that could potentially ignite the cables. It also included fire tests performed at three scales: small, medium, and full. The bench-scale tests were conducted using a cone calorimeter. In addition, medium-scale tests were conducted using a modified standard room fire test facility. Tests conducted in this facility were used to determine the behavior of communications cable with exposure to air heated to 200°C, 325°C, and 450°C, as well as direct flame impingement. Finally, a series of full-scale fire tests were conducted in a full-scale facility set up specifically for this project. Tests in this facility were used to determine the behavior of communication cables in plenums with fully developed fires in the compartment below the plenum. In this paper, data from the tests are used to investigate the potential effect of fires involving cables in plenum spaces on the hazard to building occupants in compartments contaminated by smoke distributed through a building HVAC system.

Units: SI

Citation: Symposium Papers, Anaheim, CA, 2004

Product Details

Published:

2004

File Size:

1 file , 650 KB

Product Code(s):

D-21876